The TES Cover fully enclosed motorcycle cover, as well as all versions of our "Total Enclosure System" come with a 1 year guarantee.
Warranty details : The TES Cover is guaranteed against manufacturing defect and zip failure for a period of 12 months from the date of purchase. It must only be used with a suitable side stand plate (one is supplied) or if using a center stand, a center stand plate that is fit for purpose (not supplied) The stand must sit centrally on the plate when the motorcycle is inside the TES Cover, There should be no sharp edges in contact with the protective plate at any time.
The user must in any event ensure that the cover and base section will not be damaged when used. This product must be used on a hard / smooth, non-abrasive flat surface (concrete or hard stone). Care must be taken to ensure that the weight of the motorcycle will not cause it to sink into the ground on which it is to be sited. If in any doubt, you must not use this product. Contact TES Covers for assistance with any TES Cover or any product purchased from TES Covers.
All prices are in USD