Model U105M1C New model Large TES Cover is designed to fit: Most sport motorcycles and some small cruisers. The large fits cruisers such as Harley Davidson Slim, Yamaha FZ 10, Suzuki GSXR 750-1000, Honda CBR 600, Ect.
• Cover Dimensions: Large: 89.5L”x39W”x54T” or (227x99x137cm)
Water Resistant: The TES Cover Ultra+ material used is waterproof however due to our soft high temp interior, it is necessary to purchase the optional "Cover Guard" if you want to use this cover as waterproof in direct weather. The Cover Guard will protect your investment by adding years to the life of your TES Cover. Its replaceable for only $ 30.00. The Cover Guard attaches to the outside of our Main TES Cover Body and when mated, acts as ONE Cover.
NOTE: The Cover Guard has been made "light grey in color" for added heat reflection.
Important Waterproof Options: Our new Ultra+ series covers are all equipped to accept the outdoor "Cover Guard". The new "Dual Layered" feature provides a rain tight cover designed specifically to handle the water end of the protection. Protect your investment with a "Cover Guard" By selecting the option in checkout. If used outdoors, the Cover Guard is an affordable replacement cover that will insure your primary cover system lasts for years. Each Cover Guard is replaceable for only $30.00 If your using your cover primarily under a shelter or in a garage, this option might not be necessary. You can always add it later.
Our Durable, Dust-filtering Portable Fully Enclosed Cover fits fully dressed cruisers. This cover is not only high in quality, but it's also Fully Enclosed, giving your ride the protection it needs from all weather elements when used with our NEW Cover Guard outdoor water proof add on. Our enclosed design provides unmatched protection from salt and humidity. With our filtered vents, the air circulates inside the cover while blocking the salty dew from settling on your motorcycle. The Heavy-duty bottom base provides a badly needed moisture barrier which blocks harmful evaporation from attacking your motorcycle from underneath where most common covers fail.
Gain space in your garage by using alternate storage areas, When you have the TES Cover, its like having a portable garage for your Ride!
• Easy to install. Our completely enclosed cover system installs in under 1 minute. Simply decide on where you want to store your motorcycle, layout the bottom base, drive your motorcycle on and pull top completely over. Zip cover from front to rear. It's that simple. No straps, bungees or extras to hold it down.
• Use it with or without the drive on bottom base. Although the TES Cover comes with the innovative "zip closed" heavy-duty bottom, you have the option of simply using the highly protective top by itself while rolling the bottom section up and storing it in the provided nylon bag. The loose fit design insures a simple and quick installation. This is a great option for daily use of motorcycle. *Note: The bottom base does not actually detach. When using the TES Cover without the drive on bottom, the bottom is rolled and stored in provided nylon bag. For more details on inside and outside storage information. Click Here
Dual Layered Cover provides extra layer of protection from rain and sun damage, When "Cover Guard" is purchased as option a checkout.
"New" One piece bottom base made from 1000D PVC coated woven tarpaulin.
"New" Max Venting System with added filtration.
Dual Sided PVC Coating to prevent water penetration
The Optional "Cover Guard" has multi layered PVC coated proprietary waterproof outer shell.
UV & Water Proof treatment for outdoor use.
Paint friendly soft commercial grade cotton interior.
Industries highest heat rating for soft covers at: 400F (Interior surfaces)
Strongest 10 gauge marine zippers available
Leading waterproof technology applied to all seams on Cover Guard (When Optional Cover Guard is added)
Breathable vents lets air in and out without dust/dirt
Reflective warning triangles front & rear
Twin zip lockable zippers with easy grab pulls (lock not included)
Ingenious weather-proof rear access flap provide access for cable lock and charger cord
Showing reviews 1-10 of 13 | Next
Posted by J.Iwaoka on Apr 15th 2018
We had two storms come through with extremely heavy rain. Bike stayed dry, but because the zipper cover has the same cloth lining that runs throughout the interior, water seeped in at the front when the lining got wet on the ground.. And because the floor is waterproof, it kept the water that collected inside. It was only on the ground (the top cover did it's job superbly), and I just wiped it up with a towel.
I now have a clothespin holding the cover in such a way so that the zipper cover is off the ground at the front (it was on the ground when water got in through the tranfer because of the cloth lining).
Handled the heavy rains, and though only 2 weeks in, it seems to be holding up. (Except for the stitching holding one vent starting to come apart.) Since it doesn't affect the waterproofness, it doesn't bother me.
Posted by J. Iwaoka on Apr 1st 2018
As with some other covers I've tried, the initial quality out-of-the-box impressing is good. I like te features, especially the soft liner and base. Another brand without the soft liner buffed the clear coat off my paint! Time will tell if this cover can handle Hawaii weather. I have no garage, so this cover is it. Hopefully the taped seams last longer than three months and the cover as a whole lasts longer than a year, unlike another brand's soft lined cover. I like what I see so far, and I'm happy with it!
Posted by Tom k on Mar 15th 2018
Best purchase I have made in a long time. Fits great. Surprisingly very easy to put on. Purchased it about 4 months ago and can tell this cover is going to last. Love how I can fully enclose it but also just use the top if I don’t want to fully enclose it. Definitely the best cover I have seen availble!!
Posted by Rob F on Jan 10th 2018
The best decision I've made to protect my ride during the winter season proved itself after 1 snow and salting for the season if you can't keep your bike in a garage this was the best route to go love my cover
Posted by Rich S. on Jan 6th 2018
This motorcycle cover was exactly what I needed to combat the frequent rainy days and winter of the northeast (USA). Since using this cover, I haven't had to worry about my bike becoming partial or fully exposed to the elements due to hard winds during rain storms. Which down the line, I suspect will save me money on rusted out chain replacements. The only thing I would suggest to an owner with this cover; once you've gotten the cover to fit nicely with your bike, mark out the space where your tires sit on the base to avoid the struggle of zipping up the cover. If placed on the base poorly, closing the cover can be a pain, especially when you're in a hurry. Otherwise, it is a great investment.
Posted by Frank on Jul 25th 2017
The TES cover is the best I ever owned. I have a 1978 CB400A and wanted a cover to totally protect my vintage motorcycle. The TES cover does just that! Excellent Product!
Posted by shaun. on Jun 27th 2017
After a lot of research and many months of looking I came across TES covers and liked the fully enclosed design without the hard turtle like shell. It also took up less space then the other covers. After a few days thinking about it I dropped the hammer and ordered my cover for my 2016 BMW s1000RR. I waited about 2 full weeks when shipping said it would only take at most 7 days. It being that customer I decided to call the company and find out what was the hold up. I recived kind of generic answer above a communication break down. Not a big deal but when I'm paying over $15.00 for shipping and I'm expecting my cover in the aloted time that I paid for and it had not been delivered it stings a little. Now onto the cover. The cover itself seems to be of great material and is very water proof. It's rained extreamly hard the past few days and the bike remained dry and secure. The zipper is a little touchy and gets stuck every 2 to 3 inches but I'll let it wear in more. The only one issue I have is with determining the placement of the bike and how far up I need to move so the cover fits properly. A simple rubber tire stop would be perfect for that small issue. Other then that the cover is great both look feel and function. Wish I could give it 5 stars but that shipping issue left a bitter taste in my mouth.
Posted by William Borges on Mar 9th 2017
Just recently purchased you total enclosure system for my new Harley Davidson. The fit is perfect. I can even fit my float charger in with it. It's already protected from snow and rain. If you're hesitating because of price. Just remember you get what you pay for. What's your motorcycle worth to you? Thank you Total enclosure system. I'll be recommending your product to all my friends.
Posted by David Turney on Mar 9th 2017
So far so good I'm going to have to master how to put the bike on there more centered plus it was windy the day that I used it for the first time but so far I can honestly say I think I made a great purchase. I think more practice I think that I would be able to perfect the usage
Posted by Rob on Mar 31st 2016
Just put the cover on( '69 BMW R60 with bags and handle bar windshield and crash bar). Fit and looks great. Now we'll see how long it lasts in the weather, southern CA sun can tear things up.
Showing reviews 1-10 of 13 | Next
All prices are in USD